Manitowoc Grove GMK 5200-1, Maintenance Manual

Page: 143 / 346

Maintenance work on the carrier
7.9 Axle lines
0
9
.0
3.
201
8
Maintenance manual 3 302 746 en 7 - 71
GMK5200-1
7.9.7
Lubricating longitudinal cardan shafts
H
Check all cardan shafts to see if they have grease nipples.
Cardan shafts with grease nipples must be serviced, cardan shafts without
grease nipples are maintenance-free.
Grease, spare
parts, tools
– Grease gun from the tool set.
Prerequisites – The truck crane must be raised on outriggers or parked over an inspection
pit.
– The engine must be switched off and secured against unauthorised use;
à
p. 2 - 3.
Greasing
•
Check which cardan shafts ( 1 ) have grease
nipples ( 2 ).
•
Clean the grease nipples ( 2 ).
•
Inject grease into the grease nipples until
grease escapes from the bearing points.
Do not inject grease with excessive force,
otherwise the lip seals may be damaged.
•
Remove the excess grease.
M 6
Lubricating
grease
Designation to
DIN 51502
Specification
Classification
GROVE part no.
Grease KP - 1K - 50 DIN 51825 03233369