Manitowoc Grove GMK 4100L-1, Operating Manual

Page: 544 / 1016

Operating elements for crane operation
9.2 Short description of the operating elements
9 - 134 3 302 690 en Operating manual
GMK4100L-1
2
3
.1
1.
201
7
Maximum permissible working radius display
Shows the maximum permissible working
radius (
5 ) for each slewing range.
Current working radius display
Current slewing angle display
Current position display
– When slewing
The display ( 3 ) remains at the current position. The chart moves a corre-
sponding distance to the right or left.
– When telescoping or derricking
The diagram remains at the current position. The display ( 3 ) moves a
corresponding distance up or down.
à
Slewing range type Standard , p. 11 - 53
à
Slewing range type MAXbase
, p. 11 - 55
1 Display area – always corresponds to the
largest maximum working radius (
5 )
2 Maximum permissible working radius in
the corresponding slewing range with the
currently lifted load
3 White – limit region for minimum permis-
sible working radius (display only with
active limitation)
4 Red/yellow – limit region for maximum
permissible working radius
1 Display occurs in the same manner as in
the
Monitoring menu;
à
p. 11 - 49.
2 Display occurs in the same manner as in
the
Monitoring
menu;
à
p. 11 - 50.
3 Shows the current position of the boom
head in the slewing range and working
radius range.