manualshive.com logo in svg

Manitowoc Grove GMK 4100L-1, Operating Manual

Share
Download
Manitowoc Grove GMK 4100L-1 Operating Manual Download Page 200

Starting the engine for driving / switching it off
4.1 Starting the engine from the driver's cab

4 - 6

3 302 690 en

Operating manual

GMK4100L-1

2

3

.1

1.

201

7

Dual tank

The dual tank system makes it possible to operate the truck crane in driving 
mode and crane operation mode with different types of fuel, provided this 
complies with the local regulations in the country in which you are working.

The fuel tank (

1

) is filled with the fuel for 

driving operation – display (

2

).

The fuel tank (

4

) is filled with the fuel for crane 

operation – display (

3

).

•

When refuelling, open filler necks (

1

) or (

4

).

•

Fill with the correct fuel in good time, and 
close the tank correctly. Leave sufficient 
space for the fuel to expand.

•

Close both tanks with the caps. 

Switching over the fuel supply

When fitted with dual tanks, the fuel supply is automatically switched over 
depending on whether you start the motor from the driver's cab or the 
crane cab.

– The indicator lamp (

1

) is off when the fuel tank is in use for driving.

– The indicator lamp (

1

) is lit when the fuel tank is in use for crane operation. 

Summary of Contents for Grove GMK 4100L-1

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands