Manitowoc Grove GMK 4100L-1, Maintenance Manual

Page: 318 / 356

Maintenance work on the superstructure
8.14 Other maintenance work
8 - 82 3 302 364 en Maintenance manual
GMK 4100L-1
2
5
.1
1.
201
6
8.14.4
Lubricating the step
Grease, spare
parts, tools
– Brush.
Prerequisites – The turntable must be locked.
– The engine must be switched off and secured against unauthorised use;
à
p. 2 - 3.
Retracting/
extending
•
Familiarise yourself with the description in the operating instructions
of retracting/extending the step (from the crane cab or at the outrigger
control unit);
à
Operating Instructions
.
Lubricating
•
Fully extend the step.
•
Remove the step ( 1 ) and the grille ( 2 ) –
the rails ( 3 ) are now exposed.
•
Clean the rails ( 3 ).
•
Lubricate the rails ( 3 ) lightly with a brush.
•
Retract and extend the step several times.
Whilst doing so, check that the step is
moving easily on the rails.
•
Check that the electric spindle motor ( 4 )
is running smoothly and without jerking.
•
Attach the step ( 1 ) and the grille ( 2 ).
•
Fully retract the step.
If the step is stiff, bent or does not retract completely, have the step aligned
and adjusted by
Manitowoc Crane Care
or an authorised GROVE dealer.
M 12
Designation GROVE part no.
Lubricant RHUS SW 2; 1 kg
(Apply the grease with a brush)
03325215