4.2.1 Workflow for cooking with preheat
Requirements
You have entered a new cooking profile or opened a cooking profile from the 'Cookbook'.
The oven temperature is too low for the selected cooking profile.
The steps in the cooking workflow
Step 1
Oven temperature too low
The appliance signals by flashing the 'Preheat'
indicator that the oven needs to be preheated
manually. The C-Dial shows a green light.
Step 2
Preheating
After you press the 'Preheat' button, the appli‐
ance automatically heats the cooking cham‐
ber to the cooking temperature set in the
cooking profile. The C-Dial shows a yellow
light during preheating.
Step 3
The cooking chamber is held at the oven tem‐
perature.
The C-Dial flashes green once the oven tem‐
perature is reached. The cooking chamber is
held at the oven temperature.
Prompt to load with food
The load signal beeps while the prompt to
'Open the appliance door' lights up.
Step 4
Loading
The C-Dial shows a yellow light while you
place food in the cooking chamber.
Step 5
Start
The C-Dial shows a green light after you close
the appliance door. Press the C-Dial to start
the cooking process.
Step 6
Cooking
The cooking process begins. The display
shows the remaining cooking time or the core
temperature reached. The C-Dial shows a red
light.
4 Cooking using easyDial
Operating instructions
31
