Manitowoc 140.5.204 Operation Manual Download Page 448

Page: 448 / 669

7.12.1

Unlocking the uppercarriage

Risk of damage to the uppercarriage locking mechanism if the

uppercarriage is not completely unlocked
–

After unlocking in the SENCON, check that the locking bolt

has been retracted.

–

If the locking bolt is not completely retracted, carefully

slew the uppercarriage a few degrees and repeat the

unlocking process in the SENCON.

If the locking bolt is not fully retracted while unlocking, subse-

quent slewing of the uppercarriage can damage the uppercar-

riage locking mechanism.

Requirement:

The engine is switched on.

The SENCON is ready for operation.

The safety lever is pushed forward.

Press the

[Unlock/lock uppercarriage]

quick-select button.

Uppercarriage is unlocked.

The

[Unlock/lock uppercarriage]

status display shows a

black bar.

The

[uppercarriage locking]

icon on the SENCON start

screen is green.

Requirement:

The uppercarriage has been unlocked using the

[Unlock/lock uppercarriage]

quick-select button.

NOTICE

Checking uppercarriage unlocking

Operation

27.04.2020

140.5.204 Telescopic crane

448

Reference

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands

Manitowoc 140.5.204, Operation Manual

Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands