manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 442

 

Turn rotary switch to position 

[0]

Turn rotary switch to position 

[I]

The remote radio control is switched off.

The remote radio control is switched on.

A brief signal tone sounds.

The self-test routine is executed.

A second signal tone sounds and the

operating indicator flashes.

The remote radio control is ready for use.

 

Press the push button

The horn sounds.

The remote radio control is activated.

7.9.2  Switching off remote radio control (option)

Requirement:

n

The engine is switched off.

1.

Turn the rotary switch 

[Switch remote radio control on/off]

 on

the remote radio control to position 

[0]

.

ð

The remote radio control is off.

2.

Enter the cab.

3.

Press the 

[Manual/remote radio control]

 switch to the left.

ð

The machine switches from remote radio control to

manual control.

The engine can be started from the cab.

Switch remote radio control on/off

Horn/release remote radio control

Operation

27.04.2020

140.5.204 Telescopic crane

442

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands