manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 438

7.7.5  Activating automatic idle

 

Yellow bar

Black bar

Operation at reduced engine speed is acti-

vated.

The engine is automatically switched off during

inactivity.

Operation at the engine speed currently set is

activated.

The engine continues to run during inactivity.

Automatic idle automatically lowers the engine speed during work

pauses or turns it off. This saves fuel and protects the environ-

ment.

Press the 

[automatic idle]

 quick-select icon on the SENCON.

7.7.6  Activating EcoMode

 

Yellow bar

Black bar

Engine power is reduced.

Fuel consumption is lower.

The maximum engine power is available.

“EcoMode”

 reduces the maximum engine speed. This saves fuel

and protects the environment.

Press the 

[EcoMode]

 quick-select icon on the SENCON.

7.7.7  Warm-up the machine

Risk of injury due to insufficient machine warm-up.
–

Observe the warm-up period.

Operating the machine without allowing sufficient time for

warm-up can damage the diesel engine and other compo-

nents. Machine functions will be adversely affected. This can

result in injury.

Automatic idle

EcoMode

Safety instructions

L

 WARNING

Operation

27.04.2020

140.5.204 Telescopic crane

438

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands