manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 430

1.

Grab the belt by the metal tongue and guide it at a small dis-

tance over the hip to the buckle.

 Make sure that the belt strap is not twisted.

2.

Insert the metal tongue into the belt buckle.

n

The belt buckle clicks into place.

7.6.5  Adjusting the rearview mirror

Risk of injury due to restricted view when reversing!
–

The mirrors enable you to monitor the work area.

–

Use the reversing camera to monitor the work area.

–

Observe the reversing alarm.

In certain situations, the driving area cannot be seen while

reversing.

The individual settings of the rearview mirror must be made when

commissioning the machine and every time the operator changes.

Fastening the seat belt

Safety instructions

L

 WARNING

Operation

27.04.2020

140.5.204 Telescopic crane

430

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands