manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 419

7.6  Enter the machine

Risk of falling or impact when climbing onto and down from

the machine!
–

Position the uppercarriage relative to the undercarriage so

that safe entry/exit is ensured via the steps.

–

Use handles, access ladders, and walkways when

climbing up on and down from the machine.

–

Keep the access ladders and walkways clean and clear of

dirt, snow, and ice.

There is a risk of the operator slipping and falling when

climbing up on down from the machine. If the uppercarriage is

in an unfavorable position in relation to the undercarriage, the

operator may get injured.

n

Enter and exit machine only when stationary and after the cab

has been lowered completely - never - during any motion.

n

Do not carry any objects when climbing up or down. Lift equip-

ment items onto the machine with a rope or hoist.

n

Do not use operating elements in the cab as grip handles.

7.6.1  Climbing up to the cab

Handles, access ladders, and walkways are attached to the

machine for climbing on and climbing off.

1.

Use the access ladder and crawler track to climb onto the

walkway.

2.

Grab the cab grip handle when unlocking the door.

Safety instructions

L

 WARNING

Safety measures and rules of con-

duct

Operation

27.04.2020

140.5.204 Telescopic crane

419

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands