Manitowoc 140.5.204 Operation Manual Download Page 406

Page: 406 / 669

10.

Switch on the Setup remote radio control.

11.

Mount the counterweight on the uppercarriage.

12.

Switch off the Setup remote radio control.

13.

Disable the ballasting mode.

Chapter 6.6.9 “Ballasting the machine” on page 305

6.7.9 Removing the hoist rope

Disassembly

The machine is disassembled in reverse assembly order. Detailed

information on assembly can be found in the corresponding chap-

ters.

Chapter 6.6.8 “Attaching the hoist rope” on page 290

6.8 Checks and acceptance criteria

Every day before start-up, the machine's safety must be verified in

accordance with the following criteria:

Familiarize yourself with the machine and its equipment.

Only execute tasks for which you are trained and that are in

your work area.

The stability of the machine is ensured.

The machine is horizontally aligned.

The locking bolts of the counterweight are in locked position.

All protective covers and warning labels in place on the

machine and complete.

The running gear is undamaged.

The boom sections are undamaged.

The V-belts are undamaged and tensioned.

All screw connections - particularly on the cab - are undam-

aged and tight.

All cab fastening and connection elements are undamaged and

tight.

The lateral service doors on the uppercarriage are closed.

The machine cleaned to the extent that there are no danger

points due to contamination (danger of slipping, falling, poor

visibility).

All windows clean and free of ice and snow.

All necessary maintenance tasks been performed according to

the maintenance schedule.

Further notes

Obligations of the machine oper-

ator

Visual check of machine

Start-up and setup

27.04.2020

140.5.204 Telescopic crane

406

Reference

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands

Manitowoc 140.5.204, Operation Manual

Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands