manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 387

6.7.6.4 

Folding the heavy-duty jib in transport position

Danger of falling.
–

Do not climb onto the boom or the attachments.

–

Do not climb onto equipment parts (for example, boom

sections, ballast parts) hanging from a crane.

–

Use secure climbing equipment when bolting the attach-

ments.

–

Depending on the work height, use a ladder in accordance

with the applicable standards and regulations.

n

Machine operator

n

Instructed personnel

6.7.6.4.1  Moving the diagonal tie into the park position

There are two ways to move the diagonal tie into the park or

working position in order to fold the heavy-duty jib:

n

With the auxiliary crane

n

With a suitable support

Requirement:

n

Uppercarriage is at 0°.

n

The boom is fully retracted.

n

The boom is fully lowered.

n

The hoisting rope is unreeved.

n

The 

Setup attachment

 setup mode is set on the SENCON.

L

 WARNING

Personnel

Start-up and setup

27.04.2020

140.5.204 Telescopic crane

387

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands