50960025/CP0514
32
PRINTED IN U.S.A.
Frame Level Control:
This control is located to the
rear of the tri-function joystick. The machine may be
tilted slowly as much as 10° to the left or right to level
the frame and boom in relation to the ground.
Outrigger Switches:
The outriggers are used to pro-
vide greater stability in specific applications. Press the
left switch forward to lower the left outrigger. Press the
right switch forward to lower the right outrigger. Press
both switches rearward to raise the outriggers.
Level the frame before lowering the outriggers. Lower
the outriggers until the front tires just start to raise.
FUNCTION INDICATORS
Frame Level Indicator:
Located in front of the oper-
ator on the ROPS upper cross tube, the position of the
ball indicates when the frame is level relative to a slop-
ing ground surface.
Boom Angle Indicator:
Mounted on the left side of
the outer boom, the movement of a ball indicates the
angle of boom elevation relative to the ground.
SERVICE AND SAFETY FEATURES
Transmission Oil Level:
Dipstick is located below the
cover on the front section of the main hood.
Hydraulic Pressure Test Ports:
A gauge can be
attached to these ports to check main hydraulic valve,
joystick and steering pressures.
Boom Angle
Indicator
Frame Level
Indicator
AUXILIARY HYDRAULICS
PILOT-PRESSURE APPLY
VALVE
ATTACHMENT TILT
PILOT-PRESSURE APPLY
VALVE
ATTACHMENT TILT
FORWARD SPEED
CONTROL KNOB
ATTACHMENT TILT
REARWARD SPEED
CONTROL KNOB
AUXILIARY
HYDRAULICS SPEED
CONTROL KNOBS
LOCKING
KNOBS
L71378
DECAL
LOCKING
KNOBS
L71378
DECAL
FRONT
Attachment and Auxilliary Hydraulics Pilot-Pressure Apply Valves
WARNING
DO NOT level the frame with the boom raised
or extended. Only level the frame while
stopped and with the boom fully retracted and
the attachment raised just enough to clear the
ground.
