Manitou MC 18-2 D K ST5 S1, Operator'S Manual

Page: 92 / 120

Ân
500H - PERIODIC SERVICE - EVERY 500 HOURS OF SERVICE OR 1 YEAR
CHECK Hydraulic oil
MANITOU offers a hydraulic oil analysis kit which makes it possible to extend the
recommended interval for routine servicing (2,000 hours).
In this case, we recommend an analysis of the hydraulic oil every 500 hours of service.
This analysis makes it possible to confirm the oil quality to reach the deadline of 2,000
hours.
NOTE: This kit is highly recommended for specific uses causing stresses on the
hydraulic circuit:
• Extreme environmental conditions,
• Use of attachments with a very high hydraulic flow rate (sweepers, mixers, etc.).
ANALYSIS PROCEDURE
- Order an oil analysis kit from your dealer (Part No. MANITOU 958162).
- On receipt of the kit, take a sample and follow the detailed instructions.
- According to the results, keep the analysis report or replace the hydraulic oil.
LUBRICATE Cab door locks (OPTION)
- Unscrew the tip 1 of the opening control for the right-hand half-door.
- Remove the tip of the lever 2 on each lock.
- Remove the protective casings 3 from each lock.
LUBRICATION OF THE LOCKS
- Clean and check the operation.
- Lubricate the mechanism 4.
- Refit the casings and the tips.
GREASE Mast lifting chains
- Wipe the mast lifting chains with a clean, lint-free cloth
- Vigorously brush the chains to get rid of any foreign matter, with a hard nylon
brush and clean diesel fuel.
- Rinse the chains by means of a paint brush impregnated with clean diesel fuel and
dry them with a compressed air jet.
- Carefully check each chain for any signs of wear.
IMPORTANT
In case of technical faults, consult your dealer.
- Grease the chains sparingly ( LUBRICANTS AND FUEL).
3 - 20
4
2
1
3
647837 M1 (A052020) MC 18-2/18-4 D K ST5 S1