INSTRUCTION MANUAL
WONDERRAY UV
STERILIZATION LIGHT
PACKAGE CONTENTS
•
UV lamp
•
Micro-USB charging cable
•
Manual
TECHNICAL SPECIFICATIONS
•
Power input: DC 5 V
•
Rated power: 5 W
•
Working time: 15 min/use
•
Charging time: 1.5 h
•
Size: 34 × 34 ×
165 mm
•
UV wavelength: 185
–
254 nm
COMPONENTS
(1)
Guard
(2)
UV lamp tubes
(3)
Micro-USB charging port
Bottom side:
(4)
Indicator light
(5)
Mounting notch
(6)
On/off button
USAGE
Note:
Read these instructions carefully before use.
The WonderRay UV sterilization light uses 185
–
254
nm wavelength UV light and ozone to kill bacteria
and disinfect surfaces in your home. It works best in
small rooms and confined spaces.
O
CHARGING THE LAMP
•
Before first use, fully charge the device.
•
Use the included micro-USB cable to charge
the device, by plugging one end into the
charging port and the other into any 5 V
USB charger. It works with all 5 V mobile
chargers, USB outlets in your car, etc.
•
It takes 1.5 h to fully charge the device. A
full battery suffices for two uses.
•
The indicator light will turn red while
charging. It turns off when the device is
fully charged.
O
DISINFECTING YOUR HOME
•
Choose the room or place you want to
disinfect, then press the on/off button for 3
seconds. The indicator light will turn blue.
•
Set the device on a flat surface and leave
the room.
•
After 10 seconds, the device will start
disinfecting all surrounding surfaces with
UV light.
•
After 15 minutes of working, the device will
turn off automatically. To cancel
disinfection by yourself, press the on/off
button for 1 second.
WARNINGS
•
Stay away and keep your pets away from the
room where the device is working. Long-
term exposure to the light can cause blurry
vision, skin burns and respiratory tract
irritations.
•
Do not remove the foam between the
guards.
•
Fully charge the device after every two uses.
