Adjustable Bath & Shower Chair - User Instructions
MI0236 issue 1
The Adjustable Bath & Shower Chair by Mangar International is intended to be used in a bath or shower to
provide a stable, seated support, where a user is unable to stand for long periods. It may be used with or
without the backrest.
Contents
2 x Legs inc. 4 x captive screws.
5 x Round head screws.
5 x Saddle washers.
5 x Spring washers.
1 x Seat.
1 x Backrest.
2 x Backrest support tubes.
1 x User instructions.
Assembly
Tools required: Philips screwdriver.
Seat section (Fig.1)
Place the seat upside down on a flat surface
and align the legs so that the numbers
1
&
2
stamped on the legs correspond to the
numbers
1
&
2
moulded into the seat.
Loosely secure the four captive screws (
A
).
Fit the spring washer (
B
) and saddle washer
(
C
) to the screw (
D
) and insert into the centre
hole before fully tightening.
Fully tighten the four captive screws (
A
).
Backrest section (Figs.
2&3)
Align the holes in the backrest support tubes
with the holes in the backrest.
Fit the spring washers (
B
) and saddle washers
(
C
) to the screws (
D
) and insert into the four
holes before fully tightening.
Insert the backrest tubes into the guide tubes
on the underside of the seat ensuring that
the snap buttons (
E
) locate in the guide tube
holes.
1.
2.
3.
4.
5.
6.
7.
(Model:
AB
0003)
2
1
A
C
B
D
Fig. 1
D
C B
Fig. 2
Fig. 3
E
freedom through lightweight solutions
