Mandik SEDM, Technical Documentation Manual

Page: 26 / 60

SEDM - Smoke extraction damper - multi Page 26 Version 2022-12-20
TPM 156/22
Solid wall construction - Ablative Coated Batt - vertical blade axis position
* Cover of actuating mechanism has to be removable after installation
1 SEDM
2 Solid wall construction
3 Ablative Coated Batt (e.g. Firestop Board HILTI CFS-CT B 1S 140/50 - min. density
140 kg/m
3 + Firestop acrylic sealant HILTI CFS-S ACR or equivalent)
4 Fire stop coating thickness 1 mm (e.g. HILTI CFS-CT, PROMASTOP-CC or equivalent)
5 Fixing profile with threaded rod → see pages 33 to 36
6 Calcium silicate Actuator housing*
≥ 100
X
X
■ For connection following duct → see pages 42 to 44
■
Examples of anchors to the fire dividing construction → see pages 39 to 41
EIS 120
Solid wall construction - Ablative Coated Batt - horizontal blade axis position
* Cover of actuating mechanism has to be removable after installation
X
X
≥
100
1 SEDM
2 Solid wall construction
3 Ablative Coated Batt (e.g. Firestop Board HILTI CFS-CT B 1S 140/50 - min. density
140 kg/m
3
+ Firestop acrylic sealant HILTI CFS-S ACR or equivalent)
4 Fire stop coating thickness 1 mm (e.g. HILTI CFS-CT, PROMASTOP-CC or equivalent)
5 Fixing profile with threaded rod → see pages 33 to 36
6 Calcium silicate Actuator housing*
■ For connection following duct → see pages 42 to 44
■
Examples of anchors to the fire dividing construction → see pages 39 to 41
EIS 120
Installation in solid wall construction of fire compartment