Mandik MSD, Technical Documentation Manual

Page: 24 / 49

MSD - multi smoke damper Page 24 Version 2022-12-20
TPM 159/22
X
≥
100
X
1 MSD - design „IB1‟ → see pages 47 to 48
2 Gypsum wall construction separating FIRST fire compartment from following compartment
3 Ablative Coated Batt (e.g. Firestop Board HILTI CFS-CT B 1S 140/50 - min. density 140 kg/m
3
+ Firestop acrylic sealant HILTI CFS-S ACR or equivalent)
4 Fire stop coating thickness 1 mm (e.g. HILTI CFS-CT, PROMASTOP-CC or equivalent)
5 Fixing profile with threaded rod → see pages 27 to 30
6 ROCKWOOL FIREPRO DuctRock Slab th. 90 mm acc. to EN 1366-8
7 ROCKWOOL FIREPRO Glue
FIRST
FIRE COMPARTMENT
IN DIRECTION OF
EXHAUST HEAT AND
SMOKE
Following duct
SINGLE
acc. to
EN 1366-9
Connection detail
→ see pages 36 to 37
FLOW DIRECTION
(only applies for s
moke extraction)
SECOND
FIRE COMPARTMENT IN
DIRECTION OF
EXHAUST HEAT AND
SMOKE
Dividing construction between SINGLE / MULTI duct - insulation with ROCKWOOL FIREPRO - Ablative Coated Batt
EIS 90
Following duct
MULTI
acc. to
EN 1366-8
Connection detail
→ see pages 36 to 37