Ref.: WB-VL-SM Ver.1 3.doc
28
4.11.
BACKUP FACTORY DATA
1.
Once Backup Factory Data is selected, the system will backup the Factory
calibration data automatically:
Fig. 55
2.
DO NOT press any key during the backup process. Once the process is
completed, system will go back to
OPTIONS
screen.
Important Note: Ensure calibration is correct before doing Backup
4.12.
CUSTOMER INFORMATION
1.
Once Customer data is selected, follow the On-screen instructions to feed the
Customer information file as per the requested format via USB Pend drive with
FAT32 file system:
Fig. 56
2.
Press
READ FILE
button to acquire the customer information and ensure the
details are reflected in the
Welcome
screen.
4.13.
RESET JOB NUMBER
1.
Once this option is selected, user can reset the Job number count to 1 or to any
other desired number as shown below:
Fig. 57
2.
Press
SAVE
button to save the changes & to return to
OPTIONS
.
Summary of Contents for LX WB-VL-65 DSP
