Ref.: MEL-WA(3D HCV) - OM Ver.1.7
35
6.9.10. WHEEL BRACKET HOLDING POST, 3 HOLDER
Movable Post provided to hold 3 Nos. of Integrated Wheel bracket & Target
plate units near the respective left & right side Wheels under alignment, when
not in use and for quick access during alignment.
Fig. 43
6.9.11. WHEEL BRACKET HOLDING POST, 2 HOLDER
Movable Post provided to hold 2 Nos. of Integrated Wheel bracket & Target
plate units near the respective left & right side Wheels under alignment, when
not in use and for quick access during alignment.
Fig. 44
6.9.12. ROTARY PLATE PIT SPACERS
Pits spacers of following types are provided to arrest the movement of Rotary
plates within its pit. In case of increase in Wheel base of F1 & F2, these
Spacers can be rearranged to accommodate the wheel centre.
Fig. 45
Rear Rotary plate & its pit is not applicable for 3A model
Rear-LH Rotary plate pit
Rear-RH Rotary plate pit
Front-LH Rotary plate pit
Front-RH Rotary plate pit
145mm
Middle Spacer
145mm
Rear Spacer
145mm
Front Spacer
90mm Spacer
90mm Spacer
90mm Spacer
90mm Spacer
90mm Spacer
90mm Spacer
145mm
Front Spacer
145mm
Middle Spacer
145mm
Rear Spacer
F1
F1
F2
F2
