Ref.: 3DWA - SM Ver.1.8
96
11. TROUBLE SHOOTING
The common troubles and error messages which can be attended by the users are listed in the
table given below.
For Troubles and Error messages other than that are listed in the table contact the Service
Engineer for Trouble shooting.
The Service Engineer may ask for information to help in diagnosing the service
concern. Conveying this information to the Service Engineer prior to servicing can help
to expedite service to your equipment
11.1.
HARDWARE TROUBLE SHOOTING
EQUIPMENT
Sl.
No.
Error
Causes
Remedies
1
Caster reading not
satisfactory
Brake pedal lock not applied
before Caster swing
Apply Brake pedal lock before
caster swing
Target plate disturbed during
alignment
After Runout, Target plates
should not be leveled using
Spirit level mounted on it
Rotary plate movement
struck-up
Ensure the free movement of
Rotary plate by lubricating it
Improper calibration
Re-do the calibration with high
accuracy
Un-even level between Front
& Rear floor/platform
Level the Floor/Platform
2
Camber reading not
satisfactory
Beam not leveled properly
Level the Vertical column in
both Y & Z axis
Un-even floor/platform level
Level the Floor/Platform
Wheel brackets not fixed
properly with Wheel
Fix them properly
Improper calibration
Re-do the calibration with high
accuracy
Excessive Runout
Perform Runout properly
3
Toe reading not
satisfactory
Wheel brackets not fixed
properly with Wheel
Fix them properly
Jerk occurring during PPR
Runout
Runout must be done in same
level without any jerk
4
Toe Reading
Fluctuation
Dust in the Target Plate
Clean the Target plate
External light source falling
directly on Target plates
Avoid light source falling
directly on Target plates
5
Steering cross after
alignment
Wheel brackets not fixed
properly
Improper seating will affect toe
& camber Please refer to the
image shown below
Summary of Contents for Fox 3D Smart Mobile PT
