
Ref.: 3DWA - SM Ver.1.8
78
Press
NEXT SCREEN
button to go to next screen to complete calibration
done information by feeding the name of the personnel.
Fig. 144
Press
NEXT SCREEN
button to exit from calibration.
7.4.3.
TARGET PLATE CALIBRATION (Only for spare replacement)
This feature should be used only by authorised Service personnel.
Hence User should not enter into this module
Target plates provided with the equipment are calibrated at Factory
itself and the data are stored in the system. Hence field calibration
need not be done. However in case of replacement, Target plate
calibration should be done & the data files provided along with new
Target plates should be updated into the system
This option facilitates replacement of any one of the Target plate also.
The respective check box should be selected in the screen while
calibrating that particular Target plate
Click
TARGET PLATE CALIBRATION
from
Calibration
options in
Settings
screen to calibrate the Target plate and save the data into the system. Follow
the on-screen instructions:
Check the Target plate ID check box in the screen and press
SAVE
button as
shown below:
Fig. 145
Tilt all the Target plates to 30° as shown below:
Fig. 146
Press
SAVE
button to store the image plate error readings (IPR) of all Target
plates. Now the machine is ready for the wheel alignment operation.
Summary of Contents for Fox 3D Smart Mobile PT
