MANATEC Fox 3D Smart Mobile PT, Service Manual, Page: 45 / 104

Ref.: 3DWA - SM Ver.1.8
42
Fig. 45
Sl.
No.
Description
1 Vertical column
2 Roller guide
3
Roller guide fixing Allen
button head screw
4 Saddle outer bracket
5
Rexine sheet fixing plate,
Top
6 Dowel pin
7 Top cover
8
Top cover, Rexine sheet
plate & Idler pulley cover
fixing Washer head screw
9
Wire routing „L‟ clamp
10
Wire routing 'L' clamp &
Guard fixing plate (Top)
fixing CSK-PH screw
11 Wire routing guide bush
12
Wire routing guide bush
fixing CSK-PH screw
13 Idler pulley encloser
14
Saddle outer bracket
fixing Allen button head
screw
15 Rear closing guard
16
Rear closing guard fixing
spring washer
17
Rear closing guard fixing
hex nut
18 Guard fixing plate, Top
18
Roller guide assy fixing
plain washer
5.5. DESKTOP COMPUTER
AMD Processor is not recommended for 3D alignment system
Anti-virus software should not be loaded in the Desktop computer
Desktop computer is loaded with Windows Operating system and unique Align+
software. The alignment software processes the image acquired from Camera and
converts the angle and distances using 3D imaging technology for display.
Processor Intel Core i5 - Quad Core 6
th
/ 7
th
Gen @ 3.2GHz (or) above
Mother board
Processor compatible Intel Genuine Mother board
Audio : Built-in
USB port : USB2.0 (4) & USB3.0 (2) (or) more
Display port : DP / VGA / HDMI / DVI
Ethernet
: 10/100 Built-in
RAM 4GB DDR4 (or) above
Hard Disk Drive 1TB SATA (or) above
Optical drive DVD R / RW SATA
Keyboard USB
Mouse USB Optical
Operating system Windows 10 IOT