Man iSea, Operating Instructions Manual, Page: 16 / 172

General safety instructions
14
Read this manual carefully before starting any work!
This is particularly applicable to the chapter “General Safety Instructions”
and the respective safety instructions in the chapters.
2.6 Special hazards
Residual risks that have been determined are mentioned in the following section.
S
Observe and follow the safety instructions listed here and the warnings in other chapters of these
instructions in order to mitigate risks to health and to avoid hazardous situations.
Electrical current
DANGER
Risk of life from electrical voltage
For this reason:
S
If the insulation of the voltage supply gets damaged, shut it down immediately and initiate its repair.
S
Have work carried out on the electrical system only by electricians.
S
For carrying out any work on the electrical system, deenergize the system and check that it is
deenergized.
S
Shut off the voltage supply and secure it from being switched on again before completing
maintenance, cleaning or repair work.
S
Do not bypass or disable any fuses. Replace fuses with those having the correct amperage rating.
S
Keep moisture away from live parts. It can lead to a short circuit.
Moving components
WARNING
Risk of injury from freely rotating components
For this reason:
S
Rotating machine parts are to be equipped with a suitable touch protection.
S
Never remove protective devices from rotating components.
S
Inspect and replace components only after the engine has been switched off.
Flying debris in the event of sudden engine damage
WARNING
Risk of injury from unauthorized presence in the engine room
For this reason:
S
No one is allowed in the engine room when the engine is running.
S
Observe safety and accident prevention regulations.