Maintenance and Care
76
Carefully read these Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
Change Oil Filter Element
1. Unscrew oil filter cover
1
with O-ring
2
and oil
filter insert
3
and then remove.
2. Remove oil filter insert
3
and O-ring
2
from oil
filter cover
1
.
3. Clean oil filter cover
1
.
4. Fit new O-ring
2
on oil filter cover
1
.
5. Insert new oil filter insert
3
into oil filter cover
1
.
6. Insert oil filter cover
1
with oil filter insert
3
into the oil module and then tighten.
Tightening torque
40-50 Nm
. . . . . . . . . . . . . . . . . .
