![Man D 2842 LE 620 Repair Manual Download Page 60](http://html1.mh-extra.com/html/man/d-2842-le-620/d-2842-le-620_repair-manual_4032497060.webp)
13
14
15
Removing and installing, repairing oil pump
58
Filling with engine oil
Caution:
Do not add so much engine oil that the oil
level rises above the max. marking on the
dipstick. Overfilling will result in damage
to the engine.
Fig. 13 and Fig. 15
Refill with fresh engine oil at the oil filler neck
À
.
After filling with oil disconnect electric connection
from speed pickup. Turn engine over with starter
until oil pressure warning lamp goes out / oil pres-
sure gauge indicates pressure. Then restore elec-
tric connection to speed pickup. Then start the en-
gine and allow it to run at medium speed for a few
minutes. Check oil pressure and leaks.
Then shut down the engine. After about 20 min-
utes, check the oil level.
D
Pull out dipstick
D
wipe it with a clean, lint
−
free cloth
D
and push it in again up to the stop
D
Pull out dipstick again
The oil level should be between the two notches in
the dipstick and must never fall below the lower
notch. Top up oil as necessary. Do not overfill.
1
1
1
Oil
?
MIN
MAX
Summary of Contents for D 2842 LE 620
