Mammoth Vigan SMT2X, User Manual

Page: 14 / 28

str
14
FIRST USE
1. Remove all packaging materials and dispose of them properly, so they do not fall into
the hands of children.
2. Before use, carefully clean all parts of the product (see „Cleaning and maintenance“).
3. After the assembly, plug the unit to a wall socket. The unit is now ready for use.
USE
1. Place the device on a flat, stable surface.
2. Put the prepared ingredients into the bowl. Do not attach the blade to the empty container.
Do not fill the container to the brim. Do not stuff ingredients too much to the container.
3. Connect container together with part with the blades.
4. Put the container onto the base engine. Make sure that the two grooves on the container base are
connected properly. The device itself has a built-in protection system. If the bottle is not correctly
positioned in the base, the device will not start.
5. Push down the bowl and turn it clockwise to be fastened to the base. Plug the unit into the socket
220-240V ~ 50 / 60Hz. Press the power button to switch the appliance on.
6. Best blending is achieved by pressing the power button for 10 to 20 seconds, then for 3-5 seconds
to interrupt the blending and then pressing for another 10 to 20 seconds. The number of these
cycles depends on the ingredients and your requirements.
7. When finished blending, release the power button to stop the unit.
Turn container counterclockwise to disconnect blades from the base.
8. Remove the bowl and replace the part with blades with the lid, so you can take drink with you.
IMPORTANT:
1. Blades are very sharp. Handle them with care.
2. Do not use device without interruption for more than one minute. If you are blending hard food,
interrupt operation after approximately every 10 to 15 seconds. Before proceeding wait two minutes.
3. Do not put too much fruit or vegetables into container. The maximum capacity of the container is 600 ml.
TIPS
1. Cut large objects to smaller pieces before blending.
2. Do not blend very hard foods, it can damage the blades. For example, soak legumes into water for
some time before blending.
3. Do not crush only ice. Prepare drinks with crushed ice that way you put ice pieces with maximum
dimensions of 1.5 cm x 1.5 cm into a container. Then add water.
4. If the device is overloaded, it will stop automatically. Unplug it, remove all the ingredients and let it
for approximately 15 minutes to cool down.
5. The longer you blend the ingredients, the more smooth it will be. But do not forget about breaks.
6. Blades are very sharp, handle them with care.
7. In order that the fluid flow through well bottle neck, drink must be sufficiently blended.
8. As a basis for drinks, always use a liquid (water, milk ...)
9. Drinks produced by this blender are intended for immediate consumption or short storage in
the refrigerator.
10. Make sure that the lid is always tight.
11. The temperature of fluid can not exceed 70°C.