N
WIRING: BEAUTY PANEL
25.
Remove Wire Grommet Cover from back of unit
and run GFCI Wire into unit through Back Left Wall Panel.
26.
Connect GFCI wire to Beauty Panel Junction Box
and replace Wire Grommet Cover.
27.
Connect PCD Power Cord to
Beauty Panel Junction Box.
28.
Slide Beauty Panel under Seat and Rotolock into
wall panels.
29.
Place Rotolock Caps over holes.
(2 caps)
30.
Plug in GFCI Plug on exterior
of unit to wall outlet.
31.
Hold down the plunger switch located in the
dead bolt hole on the Latch Side Wall Panel.
Verify that both lights and fans turn on when the
switch is depressed.
Page 11
PCD POWER CORD
GFCI WIRE
BEAUTY PANEL JUNCTION BOX
BEAUTY PANEL
JUNCTION BOX
ROTOLOCK
HOLES (2)
LEAVE PLUG
DISCONNECTED
Summary of Contents for Solo
Page 2: ...Page 2...
