Chapter 4
System Overview
Page 4-14
MAN 0486
Performing a quick measurement
Enclosed with the System is an installation test is the Zeta potential transfer stand-
ard plus an installation macro that allows both a
Sizing
and
Zeta
measurement to
be performed.
This can be used run through the processes involved with preparing a sample and
running a measurement, and also to see that the system performs correctly.
Unpack the Zeta standard
Take the
Zeta potential transfer standard
syringe from the pack this document
was in.
Run the Installation test macro
Enclosed with the System is an installation test
When the software has been started, select
Tools-Macros-Installation Test
:
Note
The results are saved to a measurement file named
Installation Test.dts
which opens automatically.
The instrument reports what it is going to test: size, zeta potential or both. Use this
information to decide which cell(s) to prepare.
Zetaszier Nano Basic Guide (Man0486-1.0).book Page 14 Monday, September 10, 2012 2:19 PM
