Malvern Mastersizer 2000 User Manual Download

Page: 33 / 154

Identifying the features

Chapter 3

Mastersizer 2000

Page 3-7

Wet cell

The features of a wet cell are detailed below:

ill 4860



Light shroud

This shroud stops light entering the cell area during a measurement. More impor-
tantly, it protects the user from laser emissions.

Never operate the system if any

of the covers is damaged



Cell

The cell has a pair of windows that allow the laser to pass through the sample. The
windows can be removed for cleaning/replacement (see the

Essentials Manual



“

Cell in

”

and

“

Cell out

”

connectors

The sample is recirculated through the cell and back to the dispersion unit. These
connectors attach the cell to the dispersion unit. The tubing must be connected
correctly. The tube from the dispersion unit to the cell must be connected to the

Cell in

connector. This allows any trapped air bubbles to rise through the cell. The

connectors are colour coded to aid correct connection.



Locking handle

The locking handle is rotated anti-clockwise to lock the cell in place.

Caution!

Never try to lift the optical bench by this handle.

MAN0384-1.0 Mastersizer 2000.book Page 7 Tuesday, March 20, 2007 8:56 AM

Summary of Contents for Mastersizer 2000



























































































































































Search results

Summary of Contents for Mastersizer 2000

Reviews:

Related manuals for Mastersizer 2000

Brands by name

Popular brands

Malvern Mastersizer 2000, User Manual

Search results

Summary of Contents for Mastersizer 2000

Reviews:

Related manuals for Mastersizer 2000

Brands by name

Popular brands