Maluk DONKEY LIGHT, Use And Maintenance Handbook, Page: 49 / 56

43
5.6.6 Descent
Move the rudder to one of the driving positions on the staircase (see paragraph. "Rudder regulation").
Switch on the device (see the paragraph "Switching on").
Select the descent mode (see paragraph "Movement mode selection")
Set the desired speed (see paragraph "Speed regulation").
Press the movement button allowing the device to prepare itself to tread the first descent step (the lifting
wheels will be positioned in safety mode to prevent the device from overturning when it is cantilevered
on the first step).
Hold the handles firmly and bring the device close to the first step, the device will automatically lock in
the correct descent position (movement wheels cantilevered from the step to be tread and lifting wheels in
contact with the tread, supporting the device avoiding accidental overturning).
Start descent movement.
Wait for the lifting system completes its cycle by positioning the device on the next step holding the
movement button (the device will automatically block rotation at the end of each cycle).
Pull the device to the next step and repeat the descent operations until reaching the end of the ramp. When
the ramp is completed, return the device to the stationary position.