Maluk DONKEY LIGHT, Use And Maintenance Handbook, Page: 44 / 56

38
5.5.6 Battery charging
The device battery can be recharged from its place or by pulling it out.
Rotate counterclockwise the lock/unlock key to pull out the device battery. Pull it upwards.
To recharge the battery, insert the charge connector in to the charging socket on the battery and the charging
plug in the main supply socket.
Check that th
e main power supply is in compliance with the values indicated in “Technical
specification”
To recharge, use only the charger supplied. In case of failure or loss, contact Antano Group for
replacement
Store the battery and charger as indicated in parag
raphs “Enviromental conditions for storage and
transport
” and “Enviromental conditions for operation”
While charging the batteries, do not disconnect the charger connector.
Be careful not to get the charger wet, do not open the chrager.