24
|
Side rail adjustment GS
Split side rail GS
1. In the down position, the side rails are located on the
sides of the reclining surface, which helps to stop the
mattress from slipping. (Fig. 1)
2. The side rails can be raised using a pivoting motion. In
this mid-height position, they prevent the occupant from
falling out and, when positioned at the head end, can
be used as a stable support to help the occupant stand
and move around.
3. For height adjustment and for maximum height, the
side rail is locked in place by two push buttons on
the inside of the upper section. Use two hands at
the same time to carry out telescopic adjustment up
or down, and to avoid jamming. (Fig. 2)
Do not use force!
4. To lower the telescopic side rail, use the same process
as for raising.
5. To move the side rails back into the down position, press
the catches marked on the lower side rail bar in at the
same time, and tilt. (Fig. 3)
Caution! When positioning the side protection
and raising the side rails, please ensure the
catches lock into place properly and check
them. Always use both hands to adjust the
side rails!
Caution! Activate the low position Impulse
400 (LR 100) only with the telescopic side rail
retracted (Fig. 1)
Fig. 1
Fig. 2
Fig. 3
