(G) Horizontal Wall Mount
Mounting Blocks
(G) Horizontal Wall Mount
ASSEMBLY INSTRUCTIONS
HEADBOARD
PARTS LIST:
(A) M8 bolts x4
(B) Big Washers x4
(F) Nuts x4
(H) Vertical Wall Mount x2
(G) Horizontal Wall Mount x2
(I) Screws x16
(J) Drywall Anchors x8
(L) Allen Key 70mm
(K) Allen Key 65mm
(D) M6 Bolts x4
(C) Wrench x1
(E) Small Washers x4
(A) M8 Bolts
(A) M8 Bolts
(B) Big Washers
(B) Big Washers
Legs
Figure 2
(A)
(B)
(C)
(F)
(D)
(H)
(G)
(I)
(J)
(E)
Figure 1
Headboard
Bed Frame
(F) Nuts
(E) Small Washers
(D) M6 Bolts
Figure 3
Failure to follow these warnings and assembly instructions could result in serious injury or death. Read all instructions before assembling the headboard. Keep the assembly instructions
for future use. Before each usage or assembly, inspect the headboard for damaged hardware or missing parts. DO NOT use the headboard if any parts are missing or broken. If
replacement parts and instructional literature are needed, contact the manufacturer at
800-517-7179
. DO NOT substitute parts.
Step 1
Remove the headboard from the box and lay it face down on the floor.
Open the velcro panel on the back and remove both the legs and
hardware.
Step 2
Insert each leg into one of the provided slots on the back of the
headboard and slide to adjust to your desired height.
Step 3 (see Figure 1)
Using two of the
(A) M8 bolts
and two of the
(B) big washers
for each leg, secure both legs to the headboard with the
(L) allen key
provided.
Step 4 (See Figure 2) **recommended**
Using the mounting blocks on the back of your headboard, screw the two
(G) wall mounts
to the top of your headboard with the provided
(I)
screws
. Using the remaining
(I) screws
, attach the
(H) wall mounts
to
your wall. Make sure to place the wall mounts at the correct height to pair
with your previously installed
(G) wall mounts
(see figure 2). If no wall
studs are available to secure the headboard to your wall, use the
provided
(J) drywall anchors
instead.
Lift or slide the headboard into
place to join the
(G) and (H) wall mounts
together.
Step 5 (See Figure 3)
With the front side of the headboard facing the bed frame, attach the
headboard to the frame using the
(D) M6 bolts, (E) small washers, (F)
nuts, and (K) allen key.
If your bed frame doesn’t fit the headboard, use the provided modification plates that
are included to secure the bed frame to the headboard. Additional instructions are
included with the plates.
(K)
(L)
Wall
Top o
f t
he H
eadbo
ar
d
(I) Screws x4
(I) Screws x4
(G) Wall Mount
(H) Wall Mount
(J) Drywall Anchor x4
(if needed in step 4)
