MALONE
R
MALONE
R
DownLoader
DownLoader
TM
J-STYLE FOLDING KAYAK CARRIER
12’ Safety Lines
Jawz Universal Adapters
Mounting Bolts
Kayak Carriers
Load Straps
T-Knobs
60mm
70mm
Installation & Loading Instructions - Please Read Before Beginning
1
3
2
. Insert Mounting Bolt through one hole of a Jawz adapter.
Insert washer and loosely apply a T-knob. See image 2.
. Faites passer le boulon de fixation dans l’un des trous
d’un adaptateur Jawz puis vissez légèrement un bouton
en ‘‘T’’ à la base du boulon. (Figure 2)
. Prior to installation, insert a bolt into the mounting holes in
the bottom of the carriers. Push upward to open the two
mounting hole covers located in the Base pads.
. Insert a Mounting Bolt into one mounting hole from the top
side. Rotate and close the mounting hole cover.
See image 1.
. Insérez un boulon de fixation dans l’un des trous hexagonaux
situés sur le côté supérieur du support.
(Figure 1)
. Place the carrier onto the front cross bar with the boarding
ramp facing out. Swing the Jawz under the cross bar as
shown. See image 3.
. Placez le support sur la barre transversale avant, la rampe
de chargement vers l’extérieur. Faites passer l’adaptateur
Jawz sous la barre transversale, tel qu’indiqué. (Figure 3)
1
Mounting Bolt Washers
Base Pad
Covers
IMPORTANT WARNING:
All vehicular transports are potentially hazardous. Any person(s) using Malone products are personally responsible for
following the given directions for use and/or installation and accepts full responsibility for any and all damages or injury of any kind including death,
which may result from their use and/or installation.
It is critical that all Malone racks and accessories be properly and securely attached to your vehicle. Improper attachment could result in a serious
accident, and could cause serious bodily injury or death to you or to others. You are responsible for securing the racks and accessories to your car,
checking the attachment’s prior to use, and periodically inspecting the products for adjustment, wear, and damage.
You must read and understand all of the instructions and cautions supplied with your Malone products(s) prior to installation or use. If you do not
understand all of the instructions and cautions, or, if you have no mechanical experience and are not thoroughly familiar with the installation
procedures, you should have the product installed by a professional installer.
8818
MPG110
MALONE
R
MPG111MD
Installation & Loading Instructions
SaddleUp PRO
SaddleUp PRO
TM
UNIVERSAL KAYAK CARRIERS
Mounting
Bolt
1
2
3
4
Step 1: Installing the Carriers onto the Cross Rails
. Insert a mounting bolt into the right side hex hole. See image 1.
. Insert mounting bolt through one hole of a Jawz mounting adapter and loosely
apply T-knob. See image 2.
. Place the carrier onto the front cross rail with the bottom rounded side towards the
outside of the vehicle. Swing the Jawz under the cross rail as shown. See image 3.
. Insert a mounting bolt into the left side hex hole and down through the Jawz
mounting adapter. See image 4.
T-knob
Jawz
Mounting
Bolt
Outside
Edge
12’ Bow & Stern Lines
Jawz Universal Adapters Mounting Bolts
40mm
50mm
12’ Load Straps
MPGMD109-F
Kayak Carrier
MPGMD109-R
Kayak Carrier
For SaddleUp Pro MPG109MD-F, set of 2: Follow instructions 1-6.
For SaddleUp Pro MPG109MD-R, set of 2: Follow instructions 7-11.
For SaddleUp Pro MPG110MD, set of 4: Follow instructions 1-20.
TM
TM
TM
TM
TM
TM
TM
Please Read Before Beginning:
