SkyRaider DS432 TEC User Manual
September 18, 2019
SkyRaider DS432 TEC User Manual
Page 68
This control also allows you to flip your image
Horizontally
or
Vertically
.
Flip Horizontal
reverses the image in the application area so that the top right
corner of the original image is now the top left, and the top left corner of the
original image is now the top right corner.
Flip Vertical
reverses the image in the application area so that the top right
corner of the original image is now the bottom right corner, and the top left
corner of the original image is now the bottom left corner.
Crop
Choose the
Image>Crop
command to remove the portions of an image that
does not want so that the focus is on the part of the image that is left.
First select
Edit>Image Select
(the mouse cursor will change into cross hairs) from
the
Top Menu Line
. Next use the
Left-Click
Hold and Drag
technique to draw a
rectangle around the portion of the image you would like to keep. Finally select
Image>Crop
and your
image window
will now only contain the portion of the
original image that was inside the
Image
Select’
s Rectangle
.
When you create an
Image Select Rectangle
, you can
Left-Click Hold and Drag
the rectangle around your full image to move it to a different location.
You can also resize the
Image Select Rectangle
by grabbing one of the little
boxes around the rectangle and dragging the mouse to increase, decrease, or
change dimensions of the rectangle.
