SkyRaider DS10 User Manual
July 14, 2018
SkyRaider DS10 User Manual
Page 74
Adjust
The Adjust menu will allow you to adjust the
Brightness and Contrast of the image. You will
be able to modify the RGB Color balance, as
well as the
High Lights
,
MidTones
and
Shadows
values. Color Curves and Filtering
algorithms are also in the menu control. You
will have the ability to Invert the image as well
as perform some Detail Enhancement
procedures on the image.
Adjust Brightness/Contrast
The
Image>Adjust>Brightness/Contrast•••
command offers simple adjustments
to the tonal range of an image. This command makes the same adjustment to
every pixel in the image. The
Brightness/Contrast
command does not work with
individual channels and is not recommended for high-end output because it
can result in the loss of details about the image.
Brightness:
Dragging the slider bar to the left decreases the level and dragging it
to the right increases the level. The numbers on the right of the slider
bar displays the Brightness value. Values can range from
-150
to
+150
. The
Defaul
t value is
0
.
Contrast:
Dragging the slider bar to the left decreases the level and dragging it
to the right increases the level. The numbers on the right of the slider bar
displays the Contrast value. Values can range from
-150
to
+150
. The
Default value is
0
.
Make your adjustments to the
Brightness
and
Contrast values
and
Left-Click
on
OK
to accept.
