Mallincam HD-10 II User Manual
March 30, 2020
HD-10 II User Manual
Page 56
Feature
Title
Usage
Radius
The purpose of this slider is to control the amount
the selected algorithm will affect the image. The
range is from
0
(no affect) to
30
(maximum affect).
Default
Set the
default
value for each of the above
selected algorithms. The Default value is
0
(no
blur).
Apply
If you like the blurred image and you want to
make it permanent, then
clicking
on this control
will do that.
If you would like to save the blurred image
remember to use the
Save Image As …
icon
above.
Cancel
If you don’t like the blurred image and you want to
return the image back to normal, then
clicking
on
this control will do that.
Filter/Extract/Inverse Color Tab
The
Filter/Extract/Inverse Tab
allows you to play with the colors of the
image, by either removing a specific color, selecting, or even
complementing colors to try to illustrate deeper structure in the image.
Feature
Title
Usage
Color
This control allows you to select a color that you
would like to have in enhancing your image via
the controls below.
The dropdown list provides you a choice of
red
,
green
, or
blue
.
Filter Color
This control will filter out the selected color from the
pixels of the image. This leaves an image consisting
of the combination of the remaining two colors.
For example, see below on the right an image of
the Moon with the Red channel filtered out.
