Malibu Boats M240 2021, Owner'S Manual

Page: 86 / 202

72 Dashes & Video Screens | 2021 OWNER’S MANUAL
the set speed is reached and when reaching the buoys at a
course. Select Buzzer Volume, and the following appears:
Select the volume for High and Low speed by utilizing the up
and own arrows. Touch Back to return to the Slalom Settings
screen.
Timing Recap
The timing recap will
display the buoy times
for the last two course
runs. Touch EXIT to
return to the Home
screen.
Jump Switch
This number
either increases or
decreases the intensity
of the “bump” value
upon jump switch
engagement. The
number on the left
side of the colon is
for the first segment
in the jump and the
number on the right
side of the colon
is for the second
segment of the jump.
Depending on the boat, it can help jumpers achieve a balanced
time. Touch each number to view and select an alternative
number. Your authorized Malibu dealer can help you to
determine the strength number that is best for your boat.
Jump Switch Timeout
This is the amount of
time that the boat will
apply the accelerator on
the jumpers counter cut
(or any time the jumper
is out of the actual
jump course.” This
setting is adjustable for
extreme headwinds or tailwinds, but it is recommended that it
be left at 1.8 in nearly all instances.
Touch BACK to return to the Jump Settings screen.
Trick Settings
Select Trick, then
touch the symbol in
the upper left corner
of the screen. The
following will appear:
Buzzer Volume
The buzzer volume
adjustment compensates for
increased engine noise. As
the boat speed increases, and
therefore the noises from the
engine increase, the volume
of the buzzer will increase
proportionately to the boat’s speed between 0 and 25 MPH
(40.2 km/h). No further increase occurs at speeds above
25 MPH (40.2 km/h). The buzzer emits a sound when the
set speed is reached and when reaching the buoys at a course.
Select Buzzer Volume, and the following appears: Select the
volume for High and Low speed by utilizing the up and own
arrows. Touch Back to return to the Slalom Settings screen.
River Mode and Offset
This feature provides speed
adjustment compensation for
the water current. Choices are
OFF, DOWN, and UP. Offset is
the speed of the water flow
used in the correction.
Course Manager
Touch COURSE MANAGER
and the screen will expand to
display the following:
Utilize the up and down
arrows on the right to scroll
through the available courses.
Press SELECT COURSE when the desired course is highlighted
(as in Course 3 shown in the image).
To delete a course, highlight the specific course and touch
DELETE.
To edit the name of a course, highlight that course and
touch Edit. A keyboard will appear to rename the course.
To map or remap a course, touch MAP (if not previously
mapped) or REMAP COURSE
(if previously mapped). The
following screen will appear:
Touch the preferred course
type, and the highlighting will
be bright white (as shown for
Slalom – 6 Buoy in the image).
Touch CONTINUE, and the
following screen will appear:
Follow the prompts as you
run the course.