Malibu Boats M240 2021, Owner'S Manual

Page: 82 / 202

68 Dashes & Video Screens | 2021 OWNER’S MANUAL
System Diagnostics
Touch System Diage to
view onscreen system
diagnostic information
concerning boat sensors and
GPS signal.
Reset
Touch Reset to restore
the system factory default
settings. All previous
calibration and settings will
be lost.
Service
Touch Service to view
maintenance schedules
recommended by the
engine manufacturer.
Service notices will appear
at each key cycle when
the service hour interval
has been reached, and it must be cleared by the user.
Alarms
Touch Alarms to view all
active and inactive engine
alarms.
Debug Assist
Touch Debug Assist
to access controls
for trained service techs
only.
Stereo SXM Reset
Touch Stereo SXM
Reset to restore stereo
factory default settings.
Set the mode to SXM
before proceeding.
Cruise Option
Touch 3 Event Cruise to
enable/disable the Cruise
Control option.
Time Zone
Touch Time Zone to select
the time zone.
Maps Screen
The Navionics Navigation
System uses Global
Positioning System (GPS)
satellites, and a map
database to calculate and
display route directions.
SD Card with Map data
is required. The Map
button shows actual
current bearing from the GPS. “…” is displayed if the data is not
available.
When a Navionics SD card is loaded into the ViperIII SD slot,
map data for the region will appear as a bunch of purple boxes
on the map. If the purple squares do not appear on the map, the
card is missing, not installed correctly, or possibly defective.
Navigation Controls
Touch anywhere on the
map to activate the pop-up
controls. Touch the six
directional arrows buttons
along the perimeter or the
map window to position
the cursor. Touch the
Return button to return the
cursor to the current location and the +/- buttons to zoom in/
out.
Bearing
Touch the NORTH/
BEARING/COMPASS button
to change the method of
TRACKING position. NORTH
is always pointing to the
top of the screen and in the
direction the boat is traveling
when BEARING is selected.