Malibu Boats AirMAX 240, Installation & Configuration Manual

Page: 25 / 82

Connecting Ethernet and Power
19
Installation and Configuration
Installation
2
Connecting Ethernet and Power
The Power Injector connects to the customer LAN (or a
single computer with web browser) and a source of AC
power via the supplied Power Injector AC Adapter. The
Power Injector also connects to the ODU via a single
PoE cable passing 10/100 Ethernet and DC power.
Figure 2-8. Power Injector Connections
Standard Ethernet
Cable from Customer
LAN (data only)
with RJ45 Connector
Special PoE Ethernet
Cable carries data
and Power to ODU.
RJ45-end connects to Power Injector
and circular multi-pin connector
attaches to ODU-end
Power Injector AC Adapter
connects to 110/220VAC
Ethernet to ODU-side
(label is marked
"To AirMAX ODU")
Ethernet to LAN-side
(label is marked
"To 10/100 LAN")
RJ45
RJ45
Power
POWER INJECTOR CONNECTOR DETAIL
DETAIL
Plug cable
into Connector
on ODU and then
rotate cable connector
to lock it in place
Power Injector
Antenna
Coax
Connector
PoE
Cable
to ODU