background image

In case of poor daytime light conditions (continuously overcast, cloudy 

weather throughout multiple days, low sunshine hours in wintertime) 

the light recognizes low battery voltage, and switches off automatically 

to prevent the battery from damage, and to maximize the life cycle of 

the  battery.  Whenever  the  charge  of  the  battery  is  sufficient  for  safe 

operation,  the  light  turns  on  in  the  dark.  The  process  is  automatic, 

interaction by the user is prohibited. Besides that, the light applies an 

eco-mode when the battery level is low but sufficient for operation. In 

this case the light will shine at a dimmed mode.

AUTOMATIC BATTERY PROTECTION

For  preserving  the  aesthetical  outlook,  and  maintaining  the  maximum 

functionality, and efficiency of your light, cleaning is recommended from 

time to time. Since the light is operated by solar energy, keeping the solar 

panel  clean  &  free  of  dust  is  key-essential  to  ensure  its  efficiency,  and 

maximize  discharging  time.  Please  follow  the  instructions  below  when 

cleaning your light:

1. 

Please always use a suitable, soft, and damp towel for cleaning the solar 

panel 

2. 

Apply  the  towel  with  higher  water  content  for  the  first  time  at  each 

cleaning procedure to remove the majority of dust preferably with one 

movement.

3. 

After  washing  the  towel  in  continuous  water  stream  to  remove  the 

accumulated dust, squeeze the water out of the towel, and remove the 

remainder of dust with the towel gently from the surface of the solar 

panel  if  necessary.  Care  to  avoid  scratching  the  surface  of  the  solar 

panel.

4. 

If you observe scaling, or other accumulated dirt on the surface of the 

solar  panel,  please  only  use  a  chemical  or  natural  enzymatic  based 

agent for cleaning which is recommended for solar panel cleaning by 

its manufacturer.

5. 

Cleaning of the plastic and metal parts of the light body can be executed 

easily, but attention is needed to avoid scratching of the surfaces.

6. 

Cleaning the dome which protects the LED group from external effects 

also requires cautious approach for cleaning to avoid scratching. Please 

apply  chapter  1)-4)  above  for  the  dome  as  it  is  written  in  case  of  the 

solar panel.

CLEANING INSTRUCTIONS

8

Summary of Contents for Onyx 100














Reviews: