Operation of the light:
1.
Charging by solar energy will start automatically during daytime.
2.
The light sensor turns on your light at dusk, which will shine in dimmed
mode.
3.
As motion is detected the light switches to full-power mode.
4.
Once no movement is detected anymore, the light keeps full power for
30 seconds, then it switches back to dimmed mode. In early morning
the light sensor turns off the light.
To maximize the discharge time of your light, and preserve its good
aesthetical outlook, please follow the instructions given in “Cleaning
instructions” (please find this chapter below). PLEASE PAY EXTRA
ATTENTION TO THE RIGHT CLEANING METHOD OF THE POLYCARBONATE
PARTS (LED TUBE COVER)!
2
3
4
INSTALLATION OF THE LIGHT, OPERATION INSTRUCTIONS
6
Summary of Contents for Onyx 100
Page 2: ...2 ...
