background image

USER INSTRUCTIONS, INFORMATION

1. 

After receiving your light, please open the light’s box gently with paying 

attention not to cause harm to the light and its parts.

2. 

Before starting to use your light, please make sure that there are no 

visible damages on the light and its parts.

3. 

If  you  observe  breaking,  crack,  fracture  on  the  light  or  on  its  parts, 

please do not use the product, but contact us for replacement.

4. 

Please do not apply strong physical force on the product that can 

damage the light or its parts. Non-ordinary use of the product results 

the loss of product warranty.

5. 

Please keep the box, the packaging material, and the content out of the 

reach of children, and pets. There are small objects among the parts 

of the light, which children or pets can ingest, or can cause harm to 

themselves with.

6. 

Please do not disassemble the light, do not bend the light, or apply 

physical stress on the light. Please follow the user manual’s instructions 

for installation, and operation. 

7. 

Do not expose the light to higher heat than natural caused by weather 

changes. Excessive heat may damage more constituents of the light.

8. 

Do not expose the light to continuous high- or low-pressure water flow, 

even if you intend to clean your light. The IP65 protection does not mean 

you can put the light in water, or you can wash the light with continuous 

water stream. The next chapter declares the right method of cleaning.

9. 

Please always contact Malatech Water, Ltd, or a professional appointed 

by  our  company  if  you  intend  to  disassemble  the  light,  remove  any 

of  its  parts,  or  service  the  light.  Service  attempts  made  by  users  are 

prohibited, and result the loss of product warranty.

6

Summary of Contents for Highway Raptor 40













Reviews: