XAM 21
ENG
TYRES
To ensure optimum performance, durability and safe
operation of your tyres, please observe the following
tyre instructions.
Tyre pressure must be checked before each ride and
corrected if necessary. When checking tyre pressure,
ensure that the tyres are at room temperature.
Tyre pressure
Front
2,25 bar (32,6 psi)
Rear
2,25 bar (32,6 psi)
WARNING
Do not overload your vehicle. The higher the load on
the vehicle, the higher the pressure in the tyres and the
higher the resistance of the tyres, brakes and steering.
This can lead to damage or accidents. A reasonable
weight distribution on your vehicle is important for your
safety!
Tyre inspection
1
2
3
1. Tread depth
2. Sidewall
3. Wear indicator
WARNING
Check the condition of the tyres before every
journey. If a tyre shows cross lines (minimum
tread depth), this indicates damage. Have the tyre
checked immediately by a specialist and have the
tyre replaced immediately if necessary.
RIMS
For best performance and durability and safe operation
of your vehicle, please follow the instructions below
regarding the rims.
•
Check the rims for cracks and deformations
before every ride.
•
Have damaged rims replaced by your specialist
dealer.
•
Do not carry out any unauthorised repairs to the
rims.
•
A deformed or broken rim must be replaced.
•
The wheel must be balanced after a tyre change.
•
An unbalanced wheel will result in poor
performance, difficult control of the vehicle and
shorten the life expectancy of the tyre.
•
After changing a tyre, drive slowly at first, as the
tyre must be run in.
BRAKES
Brake lever play
The brake lever should have a play of 10-20 mm measured at
the end of the lever. If this is not the case, please contact your
dealer to have the brake system checked.
MAINTENANCE & SERVICING
