Malaguti PHANTOM MAX 125, Owner'S Manual

Page: 118 / 252

16
EN
2.7 DIGITAL DASHBOARD
The digital dashboard has more functions than the analog version. These
functions are useful for a proper use of the vehicle. To select the func-
tions, simply press the
MODE button, which is on the right-hand control (3
– Fig. 16).
The functions provided are divided into:
‘main menu’ and ‘submenu or bar
graph’, section 2.7.1, and are the following: TIME (clock), TD (partial
distance), TOD (total distance), battery charge level, external tempera-
ture, oil level or engine oil change servicing, rpm.
The dashboard also features warning lights, section 2.7.1.1, indicating
when the engine oil has to be checked or changed. In case of very low
temperatures, they warn drivers that roads may be icy. These warning
lights automatically appear on the display, and are the following:
ICE (prob-
able presence of ice on the road), OIL BAR (engine oil circuit trouble), OIL
CHECK/OIL CHANGE (engine oil check or change).
In case of multiple warnings, the warning lights alternate on the display for
some seconds, until the problem displayed is solved.
The speed is displayed in km/h or mph by means of a graphic bar together
with the respective numeric value.
Insert the key in the ignition switch and turn it to position; the display
will automatically show a check of all functions for 3 seconds. After this
time the last function used before turning the engine off will be displayed.
This check is performed every time the ignition key is turned to
.
Setting
Power up the instrument board by connecting the battery to the vehicle’s
cables.
Put the key in the ignition switch and turn it to .
The names of stored models appear successively on the display (125 km/
h 125 MPH / 200 km/h 200 MPH / 250 km/h 250 MPH ).
When the code of your model appears on the display, press the
MODE
button, to make your selection. If you choose the wrong model, you will be
shown improper information (speed, km, etc.). If you choose the wrong
model, turn the panel off, wait for about two minutes and repeat the above
operations in the correct manner.
These operations must be repeated every time power is
disconnected.
The digital dashboard only works if the battery is con-
nected.
If the battery is flat, replace it immediately.
When the battery is replaced or the fuse is removed,
power is disconnected; any memorised settings will be
r e s e t .
Replace the flat battery with a new one; if the problem remains, call an
Authorised Malaguti Service Centre .
Do not use your vehicle when no function appears on the
display or when functions appear partially, since the in-
strument board is not in the condition to provide suffi-
cient information about your vehicle.
If the battery is running flat, when the vehicle is turned
on, the digital instrument board will lose its initial set-
tings (125 KM/H 125 MPH / 200 KM/H 200 MPH / 250 KM/H 250 MPH );
reset as described.