4
24.6.2013
000331
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
GEA010-1
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for
future reference.
ENB017-2
ADDITIONAL SAFETY RULES
1.
Always use protective goggles, a cap and
mask when using the blower.
2.
Never point the nozzle at anyone in the
vicinity when using the blower.
3.
Always use the dust bag when collecting dust,
chips and the like.
4.
Do not collect still smoldering cigarette ashes,
freshly cut metals shavings, screws, nails and
the like.
5.
Electric shock could occur if used on wet
surfaces. Do not expose to rain. Store indoors.
6.
Never block suction inlet and/or blower outlet.
Increased motor revolution may cause
dangerous fan breakage.
7.
The blower is not intended for use by young
children or infirm persons without
supervision.
8.
Young children should be supervised to
ensure that they do not play with the blower.
SAVE THESE INSTRUCTIONS.
FUNCTIONAL DESCRIPTION
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before adjusting or checking function
on the tool.
Switch action
CAUTION:
•
Before plugging in the tool, always check to see
that the switch trigger actuates properly and
returns to the "OFF" position when released.
For MT402
Fig.1
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger, push in
the lock button and then release the switch trigger.
Switch can be locked in "ON" position for ease of
operator comfort during extended use. Apply caution
when locking tool in "ON" position and maintain firm
grasp on tool.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
For MT403
Fig.2
To start the tool, simply pull the switch trigger. Tool
speed is increased by increasing pressure on the switch
trigger. Release the switch trigger to stop. Switch can be
locked in "ON" position for ease of operator comfort
during extended use. Apply caution when locking tool in
"ON" position and maintain firm grasp on tool.
For continuous operation, pull the switch trigger, push in
the lock button and then release the switch trigger.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
A speed control screw is provided so that maximum tool
speed can be limited (variable). Turn the speed control
screw clockwise for higher speed, and counterclockwise
for lower speed.
OPERATION
Fig.3
CAUTION:
•
Always hold the tool only by the handle when
performing an operation. Do not touch the metal
part.
•
Do not use the tool for blowing air into objects, like
rubber rafting, balls or other inflatable products.
Increased motor revolution may cause dangerous
fan breakage.
Summary of Contents for MT402
Page 8: ...8 3 4 5 6 7 8...
Page 27: ...27...
