background image

General power tool safety warnings

WARNING:

 

Read all safety warnings and 

all instructions. 

Failure to follow the warnings and 

instructions may result in electric shock, fire and/or 

serious injury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your 

mains-operated (corded) power tool or battery-operated 

(cordless) power tool.

Work area safety

1.

Keep work area clean and well lit.

 Cluttered or 

dark areas invite accidents.

2.

Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable 

liquids, gases or dust.

 Power tools create sparks 

which may ignite the dust or fumes.

3.

Keep children and bystanders away while 

operating a power tool.

 Distractions can cause

you to lose control.

Electrical Safety

1.

Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any 

adapter plugs with earthed (grounded) power 

tools. 

Unmodified plugs and matching outlets will

reduce risk of electric shock.

2.

Avoid body contact with earthed or grounded 

surfaces, such as pipes, radiators, ranges and 

refrigerators.

 There is an increased risk of elec

-

tric shock if your body is earthed or grounded.

3.

Do not expose power tools to rain or wet con-

ditions.

 Water entering a power tool will increase

the risk of electric shock.

4.

Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. 

Keep cord away from heat, oil, sharp edges 

or moving parts.

 Damaged or entangled cords 

increase the risk of electric shock.

5.

When operating a power tool outdoors, use an 

extension cord suitable for outdoor use.

 Use of 

a cord suitable for outdoor use reduces the risk of 

electric shock.

6.

If operating a power tool in a damp location is

unavoidable, use a ground fault circuit inter-

rupter (GFCI) protected supply.

 Use of a GFCI 

reduces the risk of electric shock.

WARNING  MAKITA CORDLESS  IMPACT WRENCH

Any piece of equipment can be dangerous if not operated properly.  

YOU

 are 

responsible for the safe operation of this equipment.  The operator must 

carefully read and follow any warnings, safety signs and instructions provided 

with or located on the equipment.  Do not remove, defeat, deface or render 

inoperable any of the safety devices or warnings on this equipment.  If any 

safety devices or warnings have been removed, defeated, defaced or rendered 

inoperable, 

DO NOT USE THIS EQUIPMENT!!!

  

        WARNING: Lithium-ion Batteries and/or products that contain Lithium-

ion Batteries can expose you to chemicals including cobalt lithium nickel oxide, 

and nickel, which are known to the State of California to cause cancer and birth 

defects or other reproductive harm. 

For more information, go to 

www.P65warnings.ca.gov

If the person receiving this handout will not be the user of the equipment, 

forward these instructions to the operator. If there is any doubt as to the 

operation or safety of the equipment, 

DO NOT USE!! CALL A TOOL SHED 

IMMEDIATELY!!! FAILURE TO FOLLOW THESE INSTRUCTIONS 

COULD RESULT IN INJURY OR DEATH.

Summary of Contents for XWT07









Reviews: