2 ENGLISH
SPECIFICATIONS
Model:
UR008G
Handle type
Loop handle
No load speed
(at each rotation speed level)
3: 0 - 5,000 min
-1
2: 0 - 4,600 min
-1
1: 0 - 4,000 min
-1
Overall length
(without cutting tool and battery)
1,803 mm
Nylon cord diameter
2.0 - 2.4 mm
Applicable cutting tool and
cutting diameter
Nylon cutting head
(P/N 197993-1)
430 mm
Plastic blade
(P/N 198383-1)
(P/N 199868-0)
255 mm
305 mm
Rated voltage
D.C. 36 V - 40 V max
Net weight
5.0 - 5.7 kg
Protection degree
IPX4
•
Due to our continuing program of research and development, the specifications herein are subject to change without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL4020 / BL4025* / BL4040* / BL4050F*
* : Recommended battery
Charger
DC40RA / DC40RB / DC40RC
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
PDC01 / PDC1200
•
The cord connected power source(s) listed above may not be available depending on your region of residence.
•
Before using the cord connected power source, read instruction and cautionary markings on them.
Noise
Applicable standard : ISO22868(ISO11806-1)/EN50636-2-91
Cutting tool
Sound pressure level (L
pA
) dB(A) Sound power level (L
WA
) dB(A)
L
pA
dB(A)
Uncertainty (K)
dB(A)
L
WA
dB(A)
Uncertainty (K)
dB(A)
Nylon cutting head
79.0
1.6
91.9
1.6
•
Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB (A). Wear ear protection.
NOTE:
The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE:
The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual use of the power tool can differ from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
