Makita UR008GD201 Instruction Manual Download Page 19

Page: 19 / 20

19 ENGLISH

Replacing the plastic blade

Replace the plastic blade if it is worn out or broken.

When installing the plastic blade, align the direction of

the arrow on the blade with that of the protector.

►

Arrow on the protector

Arrow on the blade

TROUBLESHOOTING

Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual,

do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replace-

ment parts for repairs.

State of abnormality

Probable cause (malfunction)

Remedy

Motor does not run.

Battery cartridge is not installed.

Install the battery cartridge.

Battery problem (under voltage)

Recharge the battery cartridge. If recharging is not

effective, replace battery cartridge.

The drive system does not work

correctly.

Ask your local authorized service center for repair.

Motor stops running after a little use. Battery's charge level is low.

Recharge the battery cartridge. If recharging is not

effective, replace battery cartridge.

Overheating.

Stop using of tool to allow it to cool down.

The tool does not reach maximum

RPM.

Battery cartridge is installed improperly. Install the battery cartridge as described in this

manual.

Battery power is dropping.

Recharge the battery cartridge. If recharging is not

effective, replace battery cartridge.

The drive system does not work

correctly.

Ask your local authorized service center for repair.

Cutting tool does not rotate:

stop the machine immediately!

Foreign object such as a branch is

jammed between the guard and the

cutting tool.

Remove the foreign object.

Cutting tool is loosely attached.

Tighten the cutting tool securely.

The drive system does not work

correctly.

Ask your local authorized service center for repair.

Abnormal vibration:

stop the machine immediately!

Broken, bent or worn cutting tool

Replace the cutting tool.

Cutting tool is loosely attached.

Tighten the cutting tool securely.

The drive system does not work

correctly.

Ask your local authorized service center for repair.

Cutting tool and motor cannot stop:

Remove the battery immediately!

Electric or electronic malfunction.

Remove the battery cartridge and ask your local

authorized service center for repair.

Summary of Contents for UR008GD201





















Search results

Summary of Contents for UR008GD201

Reviews:

Related manuals for UR008GD201

Brands by name

Popular brands

Makita UR008GD201, Instruction Manual

Search results

Summary of Contents for UR008GD201

Reviews:

Related manuals for UR008GD201

Brands by name

Popular brands